914Rubber.com Welcome to 914Rubber.com. We invite you to browse through our store and shop with confidence. You can shop as a guest or create an account with us. Either way, your shopping cart will be active until you leave the store. Thank you for visiting.

PLEASE NOTE THE SHIPPING CALCULATOR FUNCTION IS NOT CORRECT FOR MULTIPLE ITEMS AS IT ONLY ALLOWS FOR 1 LB CALCULATIONS - IT WILL NOT COMBINE FOR FLAT RATE SHIPPING. So, you can place the order and we will refund the overage, or you can contact us to forward a corrected invoice. Thanks!

Early E-Brake spring 901.424.543.00

Early E-Brake spring 901.424.543.00

This spring is notorious for breaking and in careful evaluation we realized that the way the OEM part was made concentrated force right where they were breaking. We have made a design imprevement that will make these last longer than the OEM...

2.0L Throttle Body to Plenum Seal

2.0L Throttle Body to Plenum Seal

NLA from factory, this is the 2.0L Throttle Body to Plenum Rubber Sleeve. Molded with the hose clamp stop in it just like OEM.

914 Airbox rebuild kit (without screen)

914 Airbox rebuild kit (without screen)

This replaces the flapper valve seals, the seal between the upper and lower housings, and the upper edge seal that isolates the box front the body to keep it from rubbing.

914 Center Console Box

914 Center Console Box

This is the deposit box replica that resembles the performance group console. It is constructed from wood like the OEM version and has heavy duty hinges.

914 Door handle gaskets

914 Door handle gaskets

These are the 4 pieces of rubber that isolate the handle formr the painted body. 2 for each side, This will do one car.

914 Door Light Rubber Gasket - Set of 2

914 Door Light Rubber Gasket - Set of 2

Gasket for the door position sensor that operates the interior dome light.

914 Fresh air box top seal (SEAL ONLY)- Late for use with grill

914 Fresh air box top seal (SEAL ONLY)- Late for use with  grill

This is the seal that goes on the top of the airbox that holds the grill in place. The early cars do not have the grills but you can add one by changing out this seal and including a new plastic grill.

 

914 High Temp Silicone Valve Cover Gaskets (set of 2)

914 High Temp Silicone Valve Cover Gaskets (set of 2)

These are a set of high temp silicone gaskets from that are slightly oversized that will compress to a perfect fit. These are reusable. This is a set of 2 perfect for your next oil change.

914 rear back "glass" polycarbonate

914 rear back "glass" polycarbonate

This is a rear replacement window made from Polycarbonate. It will not schratch as easily as Acrylic, but you will ge the weight savings.

 

914 Rear Targa Seal with Fuzzy Strip - OEM Profile

914 Rear Targa Seal with Fuzzy Strip - OEM Profile

This is my new and improved version of the rear targa seal. It has the OEM profile and even the fuzzy on the contact edge to prevent squeaking. This part is held in place with the OEM metal strips. 

914 Seat Back Bolster Material Only

914 Seat Back Bolster Material Only

This is a seat back/bolster, one piece that is commonly damaged. We have an instruction sheet we will email you that is helpful in the exchange.

 

914.424.075.02.NC 914 heater cable for 70-74 (NOT 914/6)

914.424.075.02.NC 914 heater cable for 70-74 (NOT 914/6)

This is a reproduction of a factory 914 heater cable that was made from an OEM part. Like the OEM we added an anti abrasion coating to keep metal from metal contact in the heater tubes. We offer you the option to purchase without in the...

914.424.075.03 914 heater cable for 75-76

914.424.075.03 914 heater cable for 75-76

This is a reproduction of a factory 914 heater cable that was made from an OEM part. Like the OEM we added an anti abrasion coating to keep metal from metal contact in the heater tubes. We offer you the option to purchase without in the...

914.424.224.03 late side shifter Firewall bushing

914.424.224.03 late side shifter Firewall bushing

This is the firewall bushing that will take some of the slop out of your shifting. Normally these are difficult to install, but we have made some changes that will allow for easy installation. We I decided to make these just like the small...

91453195910 Door aluminum tracks - hold rubber & fuzzey (2)

91453195910 Door aluminum tracks - hold rubber & fuzzey (2)

These are the aluminum door tracks that hold the scraper and fuzzy seal against the outer surface of the door glass.

914APC

914APC

This is a replica of the OEM that is close to but not exact. The edges are sewn in a tight stitch instead of being thermally bonded, but you probably wouldn't know without really looking.

914APC

914APC

This is a replica of the OEM that is close to but not exact. The edges are sewn in a tight stitch instead of being thermally bonded, but you probably wouldn't know without really looking.

Blower to mixing box hose set

These are the hoses that connect the mixing boxes to the air blower. Set of 2, They are an upgrade from the paper and aluminum OEM hoses, as they are significantly more durable.

Closed cell foam back for drivers and passenger floor pads

This is closed cell foam backing for the drivers and passenger side floor mats. You can apply onto existing floormats or we can bond to the carpets this is an option we are adding that will be selectable on the drop down menu when carpets are...

Hoses from blower to mixing box.914.571.123.10 set of 2

Hoses from blower to mixing box.914.571.123.10 set of 2

These are the hoses that are in the front trunk that go from the mixing box to the lower vent. OEM Part number 914.571.123.10 Not the flimsy paper and aluminum hoses others sell. 

Late Airbox Grill

Late Airbox Grill

Reproduction airbox grill for use with the late syle top seal. 

Misc Hardware kit

Misc Hardware kit

Misc Hardware kit – Heater lever knob, pair seat adjuster handles, rear trunk lock spring retainer, clutch pulley kit , door strap repair kit that includes the straps, springs, and rollers, the trunk spring rollers, the engine deck lid pull assembly with new base and pull as well as cable

Parking brake sealing bellows 914.424.591 set of 2

Parking brake sealing bellows 914.424.591 set of 2

This i sthe barking barake bellows that the OEM one disolves in brake fluid. Now you can replace this hard to find part, inexpensively. This is a set of 2, because if you are missing one, you probably need or will need another soon.

PCG42407501 914 heater cable for 914/6

PCG42407501 914 heater cable for 914/6

This is a reproduction of a factory 914 heater cable that was made from an OEM part. Like the OEM we added an anti abrasion coating to keep metal from metal contact in the heater tubes. We offer you the option to purchase without in the...

Porsche 914 front turn signal boot ONE only

Porsche 914 front turn signal boot ONE only

This is asingle 914 front turn signal boot that go fromt the body to the back of the signal housing. They are made from high temp silicone and will hold up much better than OEM. OEM part number is 914.631.217.10 .

Rear licence plate light - rubber only

Rear licence plate light - rubber only

This is the rubber only for the rear license plate lights. It is one piece only. You can use this to reassemble your old lights. Here's a thread where Craig at Camp 914 rebuilt his using these rubber parts http://www.914world.com/bbs2/index.php?showtopic=252567&hl=rubber+rear+light

rear window reaseal kit

rear window reaseal kit

If your window is leaking or loose and rattling around this is the kit that you will need to reseal it. It includes the 10mm sealing butyl rubber and the 2 setting blocks that are needed to isolate the window from the body. It will require you to...

Restoration Kit Most complete with options that save cash

If you are doing a serious restoration this is your package,. This will allow you to select the options you need for your project and save a significant amount doing so. There are options to purchase additional parts you can ONLY get with the...

Span Band for late side shifter cover 914.424.503.01 Repro

Span Band for late side shifter cover 914.424.503.01 Repro

This is the NLA "Span Band" that is used to tension the cover at the transmission.

914 Center Console Box

914 Center Console Box

This is the deposit box replica that resembles the performance group console. It is constructed from wood like the OEM version and has heavy duty hinges.

914 Door handle gaskets

914 Door handle gaskets

These are the 4 pieces of rubber that isolate the handle formr the painted body. 2 for each side, This will do one car.

914 Door lock bushing

914 Door lock bushing

This is an aluminum bushing that replaces the OEM plastic bushing. It will bear better than the plastic and when installed with marine grease will provide a water resistant seal. If your planning to work on your lock this is a must.

914 Door stay rebuild kit

914 Door stay rebuild kit

This is a kit that will rebuild both door stay arms. includes 2 new arms, 4 rollers and 4 springs for both doors.

914 Early (pre 75) front bumper top W/ internal

914 Early (pre 75) front bumper top W/ internal

This is a reproduction of the early front bumper top. PRICE IN CART REFLECTS $30 FLAT RATE DOMESTIC SHIPPING - for an oversized box!

914 early front and rear bumper package

914 early front and rear bumper package

This is your best value anywhere. The front and rear bumper top together.  This includes the front bumper with the internal support. Free domestic shipping included in price.

 

914 EK

914 EK

Most of the hardware not included in other early or late packages

Some only available here

 

914 Engine deck lid edge protectors

914 Engine deck lid edge protectors

This is a set of all 3 edge pieces that keep the metal edges covered.

914 Engine seal set of all 4

914 Engine seal set of all 4

This is your best value for all 4 seals. These replace the seals that help keep all the hot air from rising into the engine compartment, robbing your engine of horse power. Compare to 914-504-117-10 rear 914-504-155-10 sides and front.

914 Front Turn Signal Lenses and Side Markers with Seals

914 Front Turn Signal Lenses and Side Markers with Seals

This is a complete set of front turn signal lenses that include side marker lenses and my seals for all 4!

914 Gas pedal

914 Gas pedal

This is a reproduction gas pedal that fits just like OEM.

914 late side shifter bellows

914 late side shifter bellows

Yes 2 are shown, but you only need one. This is the bellows that goes at the rear of the shift linkage and keeps crud from getting into the shifter housing (the black plastic cup).

They were NLA, but you can get them here.

914 Long to blower heater hose

This is the hose set that goes from the longs (by drivers and passengers feet) through the bulkhead into the blower motor. These are not the flimsy paper and aluminum hoses that are available at the local parts store. This is a set of 2 - $42

914 Oil tower gasket

914 Oil tower gasket

This is a reproduction of the OEM oil tower gasket that will compress over time and leak. The twist with mine is they are slightly thicker than OEM as over time the spring will stretch. This will but a good tension on the gasket and stop it from...

914 Outer Window Scraper Seal Set

914 Outer Window Scraper Seal Set

These are the "scraper" seals that fit in the window tracks on the outside. It "scrapes" the window as it rolls down and up. Sold as a set.

914 Pedal board gas pedal stop base

914 Pedal board gas pedal stop base

This is a reproduction pedal board stop holder. Ff yours is too rusty or unservicable you can easily replace it.

914 Rear bumper top

914 Rear bumper top

This is my reproduction rear bumper top that is constructed from solid rubber (not foam like OEM). It utilizes a stainless steel mounting structure and internal support. Very hard to tell the difference between these and OEM (except they...

914 Rear strut tower caps set of 2

914 Rear strut tower caps set of 2

 This listing is for a set of 2 (enough for one car) rear strut tower caps. If yours are missing or crusty like most now you can replace them with brand new parts. I don't know of anywhere where you can buy these but here.

914 rear tail light lens seal

This is a set of soft silicone cords that are used to seal the lens to the housing. These ARE NOT the seal between the body and housing.

914 Rear Targa Seal

914 Rear Targa Seal

Rear Targa Seal for 914. Attaches to roof. Has self adhesive waterproof tape to assure fit. 

914 Rear trunk Lid Guide Bushing

914 Rear trunk Lid Guide Bushing

This part is the one that holds the spring in place on the rear trunk locking guide pin. This was only available as an assembly previously. Only $9.99

914 Seat Adjuster Handle

914 Seat Adjuster Handle

This is a replacement handle that is guaranteed not to break before you seat track does. It's powdercoated in black and attaches with machine screws $14.99

914 Side marker lens seal kit (set of 2)

914 Side marker lens seal kit (set of 2)

These have been improved over the original design. They are constructed from soft neoprene, and have been designed to actually fit the lens correctly. Note the undercut relief for the inner edge of the seal. You will not find a better seal. These fit like OEM, only better.

914 Windshield Chrome Center Clip

914 Windshield Chrome Center Clip

This is the clip at the top of the windshield that joins the two chrome sections together.

 

914 Windshield Chrome Replacement Rubber

914 Windshield Chrome Replacement Rubber

This seal replaces the chrome strip around the outside of the windshield. The windshield itself must be removed to install but it is an inexpensive alternative to replacing the chrome.

914" Early" Rubber Package

914" Early" Rubber Package

914 “Early” rubber package- To make your restoration easier we have started to group the seal kits into ”Early” and “Late” . This kit is an “Early” style kit. So what is the difference? Mainly the...

914" Late" Rubber Package

914" Late" Rubber Package

914 “Late” rubber package- To make your restoration easier we have started to group the seal kits into ”Early” and “Late” . This kit is a “Late” style kit. So what is the difference? Mainly the...

944 LCD replacement kit

944 LCD replacement kit

This is the LCD connectors and back light LED to replace the old LCD. Instructions will be sent when shipped. Save

996/986 LCD Display unit wth connectors (replacement kit)

996/986 LCD Display unit wth connectors (replacement kit)

This is a replacement kit that includes the New LCD (OEM EQUIVALENT), connectors, gloves, instructions and an alcohol wipe. This is an easy afternoon project with a 3 difficulty level. As long as you are cautious and and keep the connections...

(1)

Back pad fiberglass replacements

Back pad fiberglass replacements

These replace your OEM paper pressborad ones and are not affected by water or mositure like the OEM ones.

Basketweave or brickmold Dash Face Vinyl

Strip of Basketweave Vinyl that will finish the dash face in your 914. You have a choice of either an 72-74 rectagular basket weave or a 75-76 square weave $20. NOTE THAT COLOR OPTIONS ARE ONLY AVAILABLE IN THE LATE MATERIAL

Bilstien jack rubber

Bilstien jack rubber

This is the rubber that pulls the reciever up on the early jacks, it is used on 914, 911 and some 356.

DELUXE Rubber package

DELUXE Rubber package

914 “Late” rubber package- To make your restoration easier we have started to group the seal kits into ”Early” and “Late” . This kit is a “Late” style kit. So what is the difference? Mainly the...

Engine Deck Lid Seal

Engine Deck Lid Seal

This is the "seal " that you see between the back glass and the deck lid. It hides the gap, and keeps water from rolling directly in the opening.

Front trunk carpet kit - with plywood insert

Front trunk carpet kit - with plywood insert

This is a two piece front trunk kit made of perlon. It unilke others mine comes with the plywood attached so you can drop it in. Includes the tire board and comes in Black or Charcoal. Selcet no board to get jsut the perlon and re use your board.

914 Main Targa Seal Reproduction

Upper main seal. Note the gap below the seal, the lower targa seal goes there.

This seal is just like like the OEM and has molded rubber corner blocks that connect to the side seals. The sides are molded to fit the corner bend at the top of the windshield (like OEM), and are bonded together. Fits all years.

Plywood floor board - drivers side only

Plywood floor board - drivers side only

This is the plywood blank cut to the OEM dimmensions. PLEASE NOTE the board in the picture shoows the stop base attached, it is not included with the board, and will need to be ordered if you want it.

Porsche 914 Throttle position sensor board 2.0

Porsche 914 Throttle position sensor board 2.0

This is a new circut board and a pop rivet to install it. It comes with an instruction sheet. You may notice that your 914 cuts out or hesitates at certian throttle settings (mostly it stumbles when you start to accelerate. One cause can be that...

Porsche 914 Firewall back pad

Porsche 914 Firewall back pad

This is a solution to the OEM back pad that absorbs water and will cause rust on the back firewall. It is precision cut using the OEM as a template. The material is fireresistant and has excellent sound deadning properties. It is soft as it is...

Porsche 914 Front Turn Signal Boot

Porsche 914 Front Turn Signal Boot

These are the 914 front turn signal boots that go from the body to the back of the signal housing. They are made from high temperature silicone and will hold up much better than OEM. Available as a set of 2 or individually.

Porsche 914 Throttle position sensor board 72-73 only

Porsche 914 Throttle position sensor board 72-73 only

This is a new circut board and a pop rivet to install it. It comes with an instruction sheet. You may notice that your 914 cuts out or hesitates at certian throttle settings (mostly it stumbles when you start to accelerate. One cause can be that...

pull for deck lid machined delrin

pull for deck lid machined delrin

This is the engine deck lid pull only. If your base is good and you only need the knob, this is what you need.

Rain Hats for carbs

Rain Hats for carbs

These will not have any holes in them, you will need to drill them. These are made to fit Weber Idf's, Ida's, or any Weber using the 7''x 4.5" oval air cleaner. Also fits Dellorto DRLA's, Solex P40II. This is a set of rain hats that fit any...

Rubber bumper to keep trunk from hitting deck lid

Rubber bumper to keep trunk from hitting deck lid

This is the NLA rubber "bumper" that keeps the rear trunk lid from hitting the engine deck lid. You will need the metal angle bracket that holds this in place, as it is not included.

914 Bump Shift Knob 5 Speed

914 patern shown standard to see 911 bump click on zoom

This shift knob is very close to OEM, only the plastic is different. It is hand finished and has an inlay just like OEM.

 

Part number 901.424.014.00

914 Leather Shift Boot

914 Leather Shift Boot

This is a shift lever boot made from leather that is used in the appearance group consoles.

Stainless wire for CV bolts 36" min

Stainless wire for CV bolts 36" min

This is a 36" coil of stainless steel safety wire. To be used with drilled CV bolts.

Threashold Trim Black carpet strips only set of 2

Threashold Trim Black carpet strips only set of 2

These are just the 2 strips that hold down the carpet at the edges. Black plastic was what was used for the late cars. The plastic will not allow you to tighten down the screws without bending the heck out of the plastic. Now you can replace them...

Upper dash pad with vinyl, with early dash face vinyl

Upper dash pad with vinyl, with early dash face vinyl

This is a listing for the dash top vinyl and pad, along with the dash face vinyl. This comes with the early dash face vinyl.

 

Upper dash pad with vinyl, with late 75-76 dash face vinyl

Upper dash pad with vinyl, with late 75-76  dash face vinyl

This is a listing for the dash top vinyl and pad, along with the  late dash face vinyl.

 

 

Windshield chrome removal tool

Windshield chrome removal tool

This tool helps to remove the old trim keeping the clips intact, and if you need to reposition the new trim with minimal damage.