Gaskets

 

021256325A 021256326A Heater blower plate gasket kit

021256325A 021256326A Heater blower plate gasket kit

Constructed from high temp silicone this should last for many years and compress into the edges to provide a better seal. The OEM was a felt / fiber material that I suspect may have contained asbestos. I did find some factory seals to make a...

021256325A Heater blower plate gasket (Right)

021256325A Heater blower plate gasket (Right)

Constructed from high temp silicone this should last for many years and compress into the edges to provide a better seal. The OEM was a felt / fiber material that I suspect may have contained asbestos. I did find some factory seals to make a...

021256326A Heater blower plate gasket (Left)

021256326A Heater blower plate gasket (Left)

Constructed from high temp silicone this should last for many years and compress into the edges to provide a better seal. The OEM was a felt / fiber material that I suspect may have contained asbestos. I did find some factory seals to make a...

1.8 Throttle body seal for intake

1.8 Throttle body seal for intake

This is the throttle body gasket for the 1.8 intake. I've made the 1.7 for years and finally the 1.8 as a number of you have been asking for these, as NOS is hard to find.

477919133 Seal for VDO sender gauge 911 914 944

477919133 Seal for VDO sender gauge 911 914 944

This is a replacement seal for your VDO fuel sending unit. 477919133 477-919-133 477 919 133 477.919.133

914 Door handle gaskets

914 Door handle gaskets

These are the 4 pieces of rubber that isolate the handle formr the painted body. 2 for each side, This will do one car.

914 Door Light Rubber Gasket - Set of 2

914 Door Light Rubber Gasket - Set of 2

Gasket for the door position sensor that operates the interior dome light.

914 Early gas cap seal

914 Early gas cap seal

A simple solution for replacement of your early cap seal. Made from solvent resistant rubber. An inexpensive fix for the gas smell if you cap leaks.

Early cap only

914 Engine Tin Grommet

914 Engine Tin Grommet

NLA from factory. These are for the large openings in the Engine Tin. Sold individually, you will need 2 for a complete car.

914 Expansion Tank Gasket

914 Expansion Tank Gasket

This fits between the expansion tank and the gas tank.

914 Fog light gaskets set of 2 (enough for one car)

914 Fog light gaskets set of 2 (enough for one car)

This is a fog light gasket that replaces the crusty OEM ones you've probably had in since the car was new. $15 a set.

Not the lens portectors can be bought with for an additional savings! Shown but not included unless you select the option.

914 Foil and velcro for back pad

This is the the foil (enough to do all the edges ) and the velcro you can use to attach the engine firewall back pad.

914 Fresh air box top seal (SEAL ONLY)- Late for use with grill

914 Fresh air box top seal (SEAL ONLY)- Late for use with  grill

This is the seal that goes on the top of the airbox that holds the grill in place. The early cars do not have the grills but you can add one by changing out this seal and including a new plastic grill.

 

914 Valve Cover Gaskets - Set of 2

914 Valve Cover Gaskets - Set of 2

This is an improved version the OEM part. Over time the bales on the valve covers loose tension. These are made from a similar material that is slightly thicker and denser to create a good tight seal.

914 Mirror Base Gasket

914 Mirror Base Gasket

Mirror base gasket. This is one piece, goes between the mirror and the door.

914 Transmission tail cone gasket

914 Transmission tail cone gasket

This is the gasket you need to remove the tail cone and reinstall. If you don't want to pay for an entire kit you can get just the one you need.

914 Trunk lock gasket

914 Trunk lock gasket

These are a reproduction of the OEM version, only they actually seal. OEM was a plastic that didn't actually seal. Mine is a soft silicone that seals and will actually help heep water out of your trunk. At this price, you really can't not replace it.

Airbox rebuild kit with late (grill type) top seal

Airbox rebuild kit with late (grill type) top seal

This is the seals you will need to rebuild the airbox flappers, and seal the bower unit to the upper section. It also includes the molder top seal that holds the grill in place. Others use a seal that is cut and glued in the corners for a fit...

Early Trans Rubber Bellows and Band for Plastic Housing

Early Trans Rubber Bellows and Band for Plastic Housing

 This is a set of both the band at the housing to firewall and the bellows on the firewall housing.

Parts 914.424.502.00 and 914.424.297.00

New OEM style front turn signal seals set of 2

New OEM style front turn signal seals set of 2

Molded from a high quality rubber, these seals are one piece and fit directly to the housing just like OEM.

porsche 914 2.0 Throttle body gasket

porsche 914 2.0 Throttle body gasket

This is a reproduction 2.0 Throttle body gasket. OEM is no longer available.

Porsche 914 CV joint gasket - 1

Porsche 914 CV joint gasket - 1

This is the gasket you need to replace the OEM one when you clean up the CV jooint or put a new one in.

4 required per car

Shifter Crush "Gasket" 999.532.003.00

Shifter Crush "Gasket" 999.532.003.00

This is an OEM crush gasket that is used to hold your shifter in place.

Windage Tray Oil Baffle Seal - Set of 4

Windage Tray Oil Baffle Seal - Set of 4

These are all new silicone windage tray seals. Don't forget to replace these when you rebuild your motor.

Oil cooler and tin gasket 021119329

Oil cooler and tin gasket 021119329

Another NLA part we all need. This gasket goes on the engine tin and seals the gap between the cooler and the tin.  Made from silicone to offer a better seal. It also acts as a buffer between the two.

Now available at a reasonable price.

914 Oil tower gasket

914 Oil tower gasket

This is a reproduction of the OEM oil tower gasket that will compress over time and leak. The twist with mine is they are slightly thicker than OEM as over time the spring will stretch. This will but a good tension on the gasket and stop it from...

Early side shift firewall to housing gasket

Early side shift firewall to housing gasket

This is the tail shift gasket that holds the plastic housing to the firewall. This is only the "band" at the firewall.

 914.424.502.00

Throttle body gasket for 1.7 intake

Throttle body gasket for 1.7 intake

This is a NLA gasket available only here only $10.50

914 Tail Light Gasket Set

914 Tail Light Gasket Set

These are the gaskets that go between the body and the tail light assembly. This is a set of 2. Only $24

Speedo Drive Bushing - Double Seal (NO LEAKS) 901.318.243.12

Speedo Drive Bushing - Double Seal (NO LEAKS) 901.318.243.12

Improved speedometer drive bushing for Porsche 914 with an addition seal to stop leaks.

Part number 901.318.243