Interior parts

24" Velcro

24" Velcro

This is 24" of Velcro for the attachement of the firewall back pads or any other items that may need to attached.

The picture shows how I used it to attach the firewall back pad.

 

 

6 piece floor vinyl kit NEW

6 piece floor vinyl kit NEW

This is the perfect compliment to a new carpet kit. One of the things that doesn't quite make sense is installing a new carpet kit and leaving the crusty old vinyl on the floor. This is a pretty basic kit, it does require that you cut the seat...

911 914 Insturnment mounting ring 911.641.301.00 115mm

911 914 Insturnment mounting ring 911.641.301.00 115mm

This is a single insturnment mounting ring for you 914 or 911. 911 applications require 2 if you are replacing both. 914 only requires 1. I have made these from silicone s oyou can easly replace without having to remove the wires or cables from...

911 914 Insturnment mounting ring 911.641.902.00 100mm

911 914 Insturnment mounting ring 911.641.902.00 100mm

This is a single insturnment mounting ring for you 914 or 911. Both applications require 2 if you are replacing both. I have made these from silicone s oyou can easly replace without having to remove the wires or cables from the insturnments....

911.641.901.00 Insturnment rubber grip ring - clock 80mm 1pc

911.641.901.00 Insturnment rubber grip ring - clock 80mm  1pc

This is the 80mm clock retainer rubber also used in the small combo guage on the opposite side All of the seals are shown so that you can see the scale is corrrect. You would normally need to order 2 for one car. Also check out the speedometer drivre cable bushing I have inexpensively 911.641.520.00

914 Back Pad Vinyl Kit - Set of 3 Pieces

914 Back Pad Vinyl Kit - Set of 3 Pieces

This is a set of all 3 pieces you need to recover the back pad in your 914. It includes the center, and both drivers and passenger vinyl. You can use this to replace the cracked or faded vinyl on your existing back pad.

914 Carpet Kit German Imported Loop - 10 pc

914 Carpet Kit German Imported Loop - 10 pc

This is a 10 pc carpet kit made from high grade imported German carpet. Now available in 4 color choices. This is the closest material to OEM available. A nice replacement for your worn OEM loop type carpet.

914 Carpet Kit Perlon - 10 pc

914 Carpet Kit Perlon - 10 pc

This is a perlon carpet kit with edge binding and grommets. Just select the color you want and if it's not on the shelf we can make it to order in about a week. Please note the grommet color shown is for illustration only, custom colors available, but not always stocked.

914 Center Console Box

914 Center Console Box

This is the deposit box replica that resembles the performance group console. It is constructed from wood like the OEM version and has heavy duty hinges.

914 Dash Face Metal with Vinyl and radio plate

914 Dash Face Metal with Vinyl and radio plate

This is all the metal you need to replace the metal and vinyl on your dash. The early dashes are easier in that the metal is not attached to the vinyl. If you have a late car you will notice that the vinly is bonded to another vinyl back and you...

914 Dashtop pad vinyl with pad

914 Dashtop pad vinyl with pad

This is the vinyl and pad to replace the pad on the top of the dash.

914 Door Handle Cup Late Style Black Plastic

914 Door Handle Cup Late Style Black Plastic

This is a door handle interior cup in black plastic. Late years used these. Sold individually.

914 Early Window Crank - Chrome

914 Early Window Crank - Chrome

This is a very nice reproduction of the window crank in chrome. Sold individually.

914 Floormats -Early and Late style -MADE TO ORDER

914 Floormats -Early and Late style -MADE TO ORDER

We finally decided to look at making a floormat for our beloved 914. One that fits properly both early and late. Heads up - These are being made to order so the leat time is about 10 days We may stock more popular configureation as time goes on...

914 Pedal board gas pedal stop base

914 Pedal board gas pedal stop base

This is a reproduction pedal board stop holder. Ff yours is too rusty or unservicable you can easily replace it.

914 Pedal Stop Adjuster

914 Pedal Stop Adjuster

This is the pedal stop adjuster for the gas pedal. Made from machined delrin, these stops are a huge improvement over the cast nylon used for the OEM part.

914 rear back "glass" polycarbonate

914 rear back "glass" polycarbonate

This is a rear replacement window made from Polycarbonate. It will not schratch as easily as Acrylic, but you will ge the weight savings.

 

914 Rear strut tower caps set of 2

914 Rear strut tower caps set of 2

 This listing is for a set of 2 (enough for one car) rear strut tower caps. If yours are missing or crusty like most now you can replace them with brand new parts. I don't know of anywhere where you can buy these but here.

914 Rear trunk carpet

914 Rear trunk carpet

This is a Perlon trunk liner that is without edgebinding. If you wish to have the edges bound It is an additional $30

914 Roof liner charcoal or Black Perlon

914 Roof liner charcoal or Black Perlon

This is a precut liner for the roof in your choice of black or charcoal perlon.

914 Sail Vinyl - German reproduction like OEM- Precision cut

914 Sail Vinyl - German reproduction like OEM- Precision cut

This is the correct texture German vinyl for your 914. We have precision cut the sail pieces for a much easier installation. There are other sources for the sail vinyl, but no one provides you with a piece that thas the cut relief in the rear of...

914 Seat Back Bolster Material Only

914 Seat Back Bolster Material Only

This is a seat back/bolster, one piece that is commonly damaged. We have an instruction sheet we will email you that is helpful in the exchange.

 

914 seat base - Early or late Black

914 seat base - Early or late Black

914 Seat base only. Your choice early or late

Note the late picture is on the center piece, it is not included in this listing.

This is one piece only.

914 seat center section and headrest

914 seat center section and headrest

This is a listing for a center section with headrest only. This is for one seat only.

914 seat vinyl kit - 1 seat - you will need 2 for both

914 seat vinyl kit - 1 seat - you will need 2 for both

This includes the base, the main back and the seat bolster and back section. You will need to choose your texture, and color. Sorry the early in only available in black. Note the black will be in stock, the white and tan will initially take a...

914 Threshold trim "Chrome"

914 Threshold trim "Chrome"

This is a set of all 4 pieces, the carpet strips that hold the inner door seals, as well as the door thresholds. Just like OEM.

These are NEW

914 Window Crank Arm - Black

914 Window Crank Arm - Black

This is a window crank for your 914 like OEM. Black plastic cover over metal.

914 Window Roller Attachment Stainless Screws Set of 2

914 Window Roller Attachment Stainless Screws Set of 2

This is the correct length screw for the window roller handle attachment. In stainless, set of 2.

914.424.592.00 Emergency Brake Bellows - Set of 2

914.424.592.00 Emergency Brake Bellows - Set of 2

Set of two Ebrake bellow boots. These are NLA 914.424.592.00.

914.572.913.10 Front trunk bulkheads sealing grommet set of 2

914.572.913.10 Front trunk bulkheads sealing grommet set of 2

This is a set of 2 new front trunk bulkhead seals. These are mostly deteriorated on many cars that have them. These will make an airtaight seal with new hoses. If you elect to us ethe OEM (paper and aluminum), you may want to trim the inner lip...

91453195910 Door aluminum tracks - hold rubber & fuzzey (2)

91453195910 Door aluminum tracks - hold rubber & fuzzey (2)

These are the aluminum door tracks that hold the scraper and fuzzy seal against the outer surface of the door glass.

914APC

914APC

This is a replica of the OEM that is close to but not exact. The edges are sewn in a tight stitch instead of being thermally bonded, but you probably wouldn't know without really looking.

914APC

914APC

This is a replica of the OEM that is close to but not exact. The edges are sewn in a tight stitch instead of being thermally bonded, but you probably wouldn't know without really looking.

A-Pillar Gauge panel

A-Pillar Gauge panel

Fits onto the a-pillar and It will hold two 2 1/16" gauges. Great for those who race, see your gauges without looking away from the track. You will need to cut the holes. This is easily done with a holesaw. Comes in a smooth black finish. $75

Back Pad Light

Back Pad Light

This is a replacement for the back pad light assembly. Sorry no bulb included.

Basketweave or brickmold Dash Face Vinyl

Strip of Basketweave Vinyl that will finish the dash face in your 914. You have a choice of either an 72-74 rectagular basket weave or a 75-76 square weave $20. NOTE THAT COLOR OPTIONS ARE ONLY AVAILABLE IN THE LATE MATERIAL

Climate control knobs set of 3 - 1 red 2 black 901.571.917.00

Climate control knobs set of 3 - 1 red 2 black 901.571.917.00

Now you can buy these never available alone parts to spruce up your climate control quickly and inexpensively. This is a set of 3. One Red Two Black They were used on 911, 912, 914, and 930 models from 1965 to 1985.

Dash face vinyl for early - Brickmold

Dash face vinyl for early - Brickmold

This is a roll of material you will need for replacemnt of your early dash face patern.

Dash Top Reproduction

Dash Top Reproduction

This is our new dash top that will replace your cracked and blistered old one. These are identically textured to the OEM dash and will not be as prone to cracking due to the method of construction and the more modern materials used. A must for...

Door panel rebuild kit

Door panel rebuild kit

This is a kit that allows you to assemble a set of door panels to replace your old cut up, damaged, ones or if you just want to change color. Some Assembly required It comes with a left and right door panel core with the 3 metal mounting clips...

Door vinyl replacement for your door cards

Door vinyl replacement for your door cards

Thisi is the vinyl only to replace the old tired vinyl on your door cards. It is enough to do 2 doors. Includes the base and the upper bolster.

Early style relay board cover 914.610.111.13 Correct for 6

Early style relay board cover 914.610.111.13 Correct for 6

This is the correct style relay board cover of the early car with NON retractable seat belts. Others have made copies of the late style that has the slope, as they will fit all cars. We went the other way and made the harder to find early cover....

Engine deck lid base for pull 914.512.177.10

Engine deck lid base for pull 914.512.177.10

This is the machined base for the engine deck lid pull. It holds the back pad to the fireall in this area also.

Front trunk guide tube and pull cable

Front trunk guide tube and pull cable

This is a set of the front trunk release tube and the pull cable that goes in it. If your tube is cracked it allows the wire to flex making it dificult to open the front trunk. They were NLA from factory for some time so I decided to make them....

Front trunk guide tube only (NO CABLEINCLUDED)

Front trunk guide tube only (NO CABLEINCLUDED)

This is for the front trunk guide tube only. The cable is shon in the picture BUT IS NOT INCLUDED.

I listed this for people that just need the tube.

Grille Badge -ADAC Club

Grille Badge -ADAC Club

ADAC CAR CLUB GERMAN CAR GRILLE BADGE
(Allgemeiner Deutscher Automobil-Club e.V.)

Grille badge comes with basic mounting hardware. Silver base.

Instrument lights direct replacement set of 8 bulbs - LED

Instrument lights direct replacement set of 8 bulbs - LED

This is a set of LED bulbs that are direct replacement for your guages If you have the apearance group consoul you will need to add the option for the additional 3 bulbs. A very inexpensive way to mak you guages look much better at night.

Interior screw covers 914-552-233-10-01 Black 30 pc set

Interior screw covers 914-552-233-10-01 Black 30 pc set

These are the cover plugs used for interiors on 914's (I counted 30), 944, 911, and other vehicles. This is a set of 30. Count will cover the roll bar front and bottom, the rear under the seat belt mounts, front cover under the targa seal, the...

Late Airbox Grill and seal

Late Airbox Grill and seal

This is the airbox seal and a new airbox grill used on later cars. It can be used to retrofit you early car if you so wish.

I do also sell the grills seporately if you need just a grill.

LE Style Vinyl Decals set of 2 also white, black & silver

LE Style Vinyl Decals set of 2 also white, black & silver

This is the correctly scalled LE vinyl for your LE in correctly matched colors. I also have doen these up in black, white, and silver for others that appreciate the look. While the placement I did on my greeen car is not identical to the LE I...

Paint placard metal plate with 4 correct rivets Karman plate

Paint placard metal plate with 4 correct rivets Karman plate

If you are repainting your car this is the one plate you cant easily remove without destroying it. Now you can get a replacement plate and the rivets needed to replace it.

Plaid Material Kit - with option for bolster and back -ONE SEAT

Completed seat upholstered with Green Tartan Plaid Material kit and optional vinyl bolster.

Seat back and bottom presewn with tartan fabric. Available in Black/grey, Matisse-blue, Ski-blue, Green, Greenish-yellow, Yellow, Orange, Bright-red, and Burgundy-red. Optional Vinyl Seat Bolster.

Plywood floor board - drivers side only

Plywood floor board - drivers side only

This is the plywood blank cut to the OEM dimmensions. PLEASE NOTE the board in the picture shoows the stop base attached, it is not included with the board, and will need to be ordered if you want it.

Porsche 914 911 Hockey puck horn base only

Porsche 914 911 Hockey puck horn base only

Reproduction of the hockey puck horn base. Please note hareware to mount the spring assembly is #8x1/2" not metric. will require some modification )increase of hole size on mounting.

 

Porsche 914 Door Panel Clips set of 18 - both doors

Porsche 914 Door Panel Clips set of 18 - both doors

These will fit any year of 914, note it's a full set of all 18 - Enough for both doors. 

Porsche 914 Door panel upholstery kit

Porsche 914 Door panel upholstery kit

This is enough vinyl to recover a pair of door panels. Comes with two pieces of black basketweave material and two pieces of plain vinyl to do the tops. Also comes with foam underlay for both the top and the bottom of the door panels $70

Porsche 914 fiberglass door panels upholstered with padding

Porsche 914 fiberglass door panels upholstered with padding

These fiberglass door panels are pre upholstered in vinly. your choice basket weave or plain. You will need to select the option of Early 70-74 "basket weave" which is rectangular. Late 75-76 for which the pater is Square or Smooth

Porsche 914 RS style door panel with fiberglass core

Porsche 914 RS style door panel with fiberglass core

These come with a fiberglass core that won't warp like the factory fiberboard cores have. They come in black vinyl and all holes are cut into the cores for door handles, window cranks etc, but the vinyl remains un-cut for the select few that have...

Porsche 914 sail and roll bar vinyl

Porsche 914 sail and roll bar vinyl

This is the replacement vinyl for the rolll bar sides and the roll bar. It is precision cut for an easier installation. This is for the domestic marine grade material. It's not identical to OEM, but is less expensive.

Radio plates for modern radio DIN style / Delete plate

Radio plates for modern radio DIN style / Delete plate

This is a radio plate for the 914 covered with the early or late style dash face vinyl. It comes with self adheasive backing for easy installation.

Note there is an option for radio delete

Recaro Seat adjuster knob 911.521.163.00

Recaro Seat adjuster knob 911.521.163.00

Reproduction Seat adjuster knob for recaro seats. Has metal clip internally to engage the seat rod. Save some cash on these!

Seat adjuster bushing 914 521 203 10

Seat adjuster bushing 914 521 203 10

This is the long discontinued seat adjuster bushing that allows the armature to rotate at the spring. This is for one bushing. Note that I do sell a complete kit with 2 bushings, the 2 other main guide bushings, new roll pins. Best of all it...

Seat adjuster outer guide bushing 914 521 205 10

Seat adjuster outer guide bushing 914 521 205 10

This is the outer guide bushing for the seat adjuster rod. It helps to transfer torque on the bar to help release the tilt. Note that I do sell a complete kit with 2 bushingsm the smaller guide bushings, new roll pins. Best of all it comes with a...

Seat adjuster rebuild kit for one car and special tool included

Seat adjuster rebuild kit for one car and special tool included

This kit is enough to do 2 seats or one car. It includes 2 of each bushing 2 drive pins and the special tool you will want.

Seat base high density foam core

Seat base high density foam core

This is a high density foam blank that is used in the construction of the seat base. Note you can make it look just like OEM if you use the string pull through method to tension the 1st seam. Just like the OEM ones. Note that if you do not it...

Seat heater assembly self contained

Seat heater assembly self contained

This is a self contained seat heater that includes the back and the base pads. They have pre assembles snap together (and apart) wirring. It has a high low and off switch and relay included with a fuse that can be wirred inline. Comes with...

Shifter Crush "Gasket" 999.532.003.00

Shifter Crush "Gasket" 999.532.003.00

This is an OEM crush gasket that is used to hold your shifter in place.

Special tool for drive pins - seat adjuster applicatiom SPT900

Special tool for drive pins - seat adjuster applicatiom SPT900

This is a special tool to install drive pins. It allows you to center the pin and use a hammer to wedge the pin in.

Tensioning rod for seat tilt adjuster 900.095.010.01

Tensioning rod for seat tilt adjuster 900.095.010.01

This is the roll pin necessary to keep tension on the spring for the tilt adjuster. It has other applications also. Note that I do sell a complete kit with 2 bushings, the 2 other main guide bushings, new roll pins. Best of all it comes with a...

Threashold Trim Black

Threashold Trim Black

This is a full set for one car; it includes 2 threshold plates and 2 carpet strips. Comparable to the factory plastic ones, except they will not bend at the carpet trim screws. These are hardcoat anodized black. 

Threashold Trim Black carpet strips only set of 2

Threashold Trim Black carpet strips only set of 2

These are just the 2 strips that hold down the carpet at the edges. Black plastic was what was used for the late cars. The plastic will not allow you to tighten down the screws without bending the heck out of the plastic. Now you can replace them...

Upper dash pad with vinyl, with early dash face vinyl

Upper dash pad with vinyl, with early dash face vinyl

This is a listing for the dash top vinyl and pad, along with the dash face vinyl. This comes with the early dash face vinyl.

 

Upper dash pad with vinyl, with late 75-76 dash face vinyl

Upper dash pad with vinyl, with late 75-76  dash face vinyl

This is a listing for the dash top vinyl and pad, along with the  late dash face vinyl.

 

 

Visor cores for rebuild service

These are cores fo r our visor rebuild service. We charge $75 for cores because we want them back. Please note that you will want to strip down and return your cores (we charge $25 to strip them). You will also need to check the screw bases to...

Windshield washer offset isolator standoff

Windshield washer offset isolator standoff

If you've done a bare metal restoration, you may well be familiar with this part. probably 80% of all the cars out there have the factory original offset isolators. Most have deteriorated and cracked if not sheared. Mine actually split in 2....

914 Gas pedal

914 Gas pedal

This is a reproduction gas pedal that fits just like OEM.

914 Fiberglass door replacement panels

914 Fiberglass door replacement panels

Replace your old cut up pressboard door panels. These come with a bolster strip and mounts (attached).

914 heater lever knob - Red

914 heater lever knob - Red

This is a direct

replacement for your faded or beat up heater lever. Simply screws on after the old one screws off.

914 Seat Adjuster Handle

914 Seat Adjuster Handle

This is a replacement handle that is guaranteed not to break before you seat track does. It's powdercoated in black and attaches with machine screws $14.99

914 Visor clip set left right and center

914 Visor clip set left right and center

These are a complete set of visor clips with the left right and center. They have stainless pins so they will not rust. The left and right are still available, but are a superseded part that has a smooth texture.

914 Bump Shift Knob 5 Speed

914 patern shown standard to see 911 bump click on zoom

This shift knob is very close to OEM, only the plastic is different. It is hand finished and has an inlay just like OEM.

 

Part number 901.424.014.00

914 Leather Shift Boot

914 Leather Shift Boot

This is a shift lever boot made from leather that is used in the appearance group consoles.

914 Long to blower heater hose set of 2914.572.123.10

914 Long to blower heater hose set of 2914.572.123.10

This is the hose set that goes from the longs (by drivers and passengers feet) through the bulkhead into the blower motor. These are not the flimsy paper and aluminum hoses that are available at the local parts store. This is a set of 2 - $42