Lenses and lens seals

911 914 Insturnment mounting ring 911.641.301.00 115mm

911 914 Insturnment mounting ring 911.641.301.00 115mm

This is a single insturnment mounting ring for you 914 or 911. 911 applications require 2 if you are replacing both. 914 only requires 1. I have made these from silicone s oyou can easly replace without having to remove the wires or cables from...

914 Early Fog Light Lens vTN4 style

914 Early Fog Light Lens vTN4 style

This is a reproduction fog light lens to replace your old ones. Sold individually

914 Fog light gaskets set of 2 (enough for one car)

914 Fog light gaskets set of 2 (enough for one car)

This is a fog light gasket that replaces the crusty OEM ones you've probably had in since the car was new. $15 a set.

Not the lens portectors can be bought with for an additional savings! Shown but not included unless you select the option.

914 fog light lens protectors set for one car set of (2)

914 fog light lens protectors set for one car  set of (2)

The fog lights lenses take a bunch of abuse. These get pitted over time and get bullseyes. You can reduce the amout of road damage significantly by covering them with a protective film. These are 2 precut pieces of protective film made for...

914 Front Turn Signal Lenses and Side Markers with Seals

914 Front Turn Signal Lenses and Side Markers with Seals

This is a complete set of front turn signal lenses that include side marker lenses and my seals for all 4!

914 headlight actuator arm. 914.750.185.11 set of 2

914 headlight actuator arm. 914.750.185.11 set of 2

This is a set of headlight push rods or actuator arms that were the later style, replacing the metal ones. They are lighter that the old arms and actually have the bushing built into them. I was making the bushings for the metal arms and noticed...

914 Headlight pivot bushings set of 4 enough for one car

914 Headlight pivot bushings set of 4 enough for one car

Headlight pivot bushings. These replace the old nylon ones that desintegrate. They go in the tube and interact with the metal brackets that mount to the body. We are doing up the arm bushings next and will have them in a few weeks.

914 rear tail light lens seal

914 rear tail light lens seal

This is a set of soft silicone cords that are used to seal the lens to the housing. These ARE NOT the seal between the body and housing.

914 Side marker electrical boot 914.631.218.10 set of 2

914 Side marker electrical boot 914.631.218.10 set of 2

Now you can get a set of 2 quality reproduction side marker lens caps. These seal the crud out and help to minimize corrosion of the contacts. As these see all the elements they are a critical seal. Now you can replace your brittle or missing...

914 Side marker lens seal kit (set of 2)

914 Side marker lens seal kit (set of 2)

These have been improved over the original design. They are constructed from soft neoprene, and have been designed to actually fit the lens correctly. Note the undercut relief for the inner edge of the seal. You will not find a better seal. These fit like OEM, only better.

914 side marker lenses - Clear

914 side marker lenses - Clear

This is a set of left and right clear lenses. Seals sold separately. $46

914 Tail Light Gasket Set

914 Tail Light Gasket Set

These are the gaskets that go between the body and the tail light assembly. This is a set of 2. Only $24

914 Trunk lock gasket

914 Trunk lock gasket

These are a reproduction of the OEM version, only they actually seal. OEM was a plastic that didn't actually seal. Mine is a soft silicone that seals and will actually help heep water out of your trunk. At this price, you really can't not replace it.

New Fog light Grills set left and right - like OEM

New Fog light Grills set left and right - like OEM

These are the 3rd generation of our fog light grills and we jhave finally got them nailed. Comparable to OEM in material, fit and finish. Utilizing a more durable plastic these will withstand 2x the inpact of the previous generation. They also...

(1)

New OEM style front turn signal seals set of 2

New OEM style front turn signal seals set of 2

Molded from a high quality rubber, these seals are one piece and fit directly to the housing just like OEM.

Porsche 911 fog light lens Euro Version Amber lens

Porsche 911 fog light lens Euro Version Amber  lens

NOS Hella Fog light lens (1) Euro Version in amber. Part #901.631.211.01. Very limited supply

Porsche 911 fog light lens Euro Version Clear lens

Porsche 911 fog light lens Euro Version Clear lens

NOS Hella Fog light lens (1) Euro Version Clear. Part # 901.631.211.01 Clear lens. 

Shown with optional rubber seal

Porsche 911 fog light lens US Version Amber lens

Porsche 911 fog light lens US Version Amber lens

NOS Hella Fog light lens (1) US Version Amber. Part # 901.631.211.04 Very limited quantity

Porsche 911 fog light lens US Version Clear lens

Porsche 911 fog light lens US Version Clear lens

NOS Hella Fog light lens (1) US Version Clear. Part # 901.631.211.04 Clear lens. 

Porsche 914 Amber Turn Signal Lenses - Set

Porsche 914 Amber Turn Signal Lenses - Set

This is a set of 2 front turn signal lenses. Replace your old ones for a reasonable cost.

 

Porsche 914 Front Turn Signal Boot

Porsche 914 Front Turn Signal Boot

These are the 914 front turn signal boots that go from the body to the back of the signal housing. They are made from high temperature silicone and will hold up much better than OEM. Available as a set of 2 or individually.

Porsche 914 front turn signal boot ONE only

Porsche 914 front turn signal boot ONE only

This is asingle 914 front turn signal boot that go fromt the body to the back of the signal housing. They are made from high temp silicone and will hold up much better than OEM. OEM part number is 914.631.217.10 .

Rear licence plate light - rubber only

Rear licence plate light - rubber only

This is the rubber only for the rear license plate lights. It is one piece only. You can use this to reassemble your old lights. Here's a thread where Craig at Camp 914 rebuilt his using these rubber parts http://www.914world.com/bbs2/index.php?showtopic=252567&hl=rubber+rear+light

Side marker lens L&R- Amber

Side marker lens L&R- Amber

This is the amber (like OEM) side marker lenses It is a set of left and right.

Side marker plasic clip to hold the base to the body- 4 req /car

Side marker plasic clip to hold the base to the body- 4 req /car

These are the clips that hold the base to the car body and often break. Sold individualy, so if you need a full set for your car you will need 4.

TN1-2 Amber Lens 1 lens with seal and lens protector

TN1-2 Amber Lens 1 lens with seal and lens protector

This is a NOS lens correct for the 914/6 and early cars. These have been NLA for decades. This is from a stockpile I found in Germany. There is a finite amount of these but I'm not greedy. These have sold in the last year for as much as $125 for...

TN1-2 Clear Lens 1 lens with seal and lens protector

TN1-2 Clear Lens 1 lens with seal and lens protector

This is a NOS lens correct for the 914/6 and early cars. These have been NLA for decades. This is from a stockpile I found in Germany. There is a finite amount of these but I'm not greedy. These have sold in the last year for as much as $125 for...

Turn Signal Lens Set Group Buy

Turn Signal Lens Set Group Buy

Now until 4/20/2017, add a set of lens seals to your order and use coupon code GBLENS2017 to receive free first class mail shipping.