Misc Hardware

Early E-Brake spring 901.424.543.00

Early E-Brake spring 901.424.543.00

This spring is notorious for breaking and in careful evaluation we realized that the way the OEM part was made concentrated force right where they were breaking. We have made a design imprevement that will make these last longer than the OEM...

901-628-923-01 Wiper Grommet Female - Set of 2

901-628-923-01 Wiper Grommet Female - Set of 2

This is a gasket that has been way overpriced for too long. Help me make these and other more afordable parts with your purchase today!

 

part number 901.628.923.01

901.628.926.00 Wiper cap

901.628.926.00 Wiper cap

While you are replacing your wiper grommets might as well replace these. Most are in poor shape 

911.424.139.00 Ball cup for shifter at transmission

911.424.139.00 Ball cup for shifter at transmission

This is the ball cup that fits into the lever on the transmission that connects to the rod. Don't forget to check out the other related items as you may need them.

914 Bump Shift Knob 5 Speed

914 patern shown standard to see 911 bump click on zoom

This shift knob is very close to OEM, only the plastic is different. It is hand finished and has an inlay just like OEM.

 

Part number 901.424.014.00

914 Clutch pulley assembly

914 Clutch pulley assembly

This is a custom machined Delrin Pulley with a new insert bushing.

914 CV bolt drilled for safety wire includes wave washer

914 CV bolt drilled for safety wire includes wave washer

This is a single new CV bolt machined for safety wire, with wave washer included. 16 required per car.

914 Door Handle Cup Late Style Black Plastic

914 Door Handle Cup Late Style Black Plastic

This is a door handle interior cup in black plastic. Late years used these. Sold individually.

914 Door lock bushing

914 Door lock bushing

This is an aluminum bushing that replaces the OEM plastic bushing. It will bear better than the plastic and when installed with marine grease will provide a water resistant seal. If your planning to work on your lock this is a must.

914 Door stay arm

914 Door stay arm

This is a single arm that you can use to replace the old one if your roller has worn all the way down and flattened the ridges that make the door stay open. This is one arm. You will need 2 if you are doing both doors.

914 Door stay roller replacements Rollers only

914 Door stay roller replacements Rollers only

This is a set of both rollers for 2 doors. Enough to do 1 car. These are notorious for wearing in the nylon side and flattening the aluminum strap. $19.99

914 door stay spring - 4 required per car - sold as each

914 door stay spring - 4 required per car - sold as each

This is a spring that replaces the OEM ones. It is a reproduction that has the same composition and pull rating. Also looks like OEM. You will need to order 4 if you intend to do an entire car. Note the picture shows the springs as well as the...

914 Early Fog Light Lens vTN4 style

914 Early Fog Light Lens vTN4 style

This is a reproduction fog light lens to replace your old ones. Sold individually

914 Early Window Crank - Chrome

914 Early Window Crank - Chrome

This is a very nice reproduction of the window crank in chrome. Sold individually.

914 Early Window Rollers - Set of 8

914 Early Window Rollers - Set of 8

These replace the rollers for the early style windows. This is a set of all 8 to do both windows. If you can see the metal bonded to the front edge of the window you will need this style.

914 EK

914 EK

Most of the hardware not included in other early or late packages

Some only available here

 

914 Eyebrow grommets set of 6

914 Eyebrow grommets set of 6

This is a set of all 6 grommets you will need to install the eye lid metal at the base of the headlight bucket. I made these slightly easier to install.

914 Fiberglass flex dam without rubber

914 Fiberglass flex dam  without rubber

This is the fiberglass portion of the Flexdam I make. You can order it with the rubber in another listing, this is for the fiberglass section only.

914 Flat tow Bar

914 Flat tow Bar

This is a flat tow bar that I use to tow to all the events over 3 hours. My significant other isn’t really into all day drives, that and I like the insurance that if it should decide to stop running at any point I can easily hook up and get...

914 Foil and velcro for back pad

This is the the foil (enough to do all the edges ) and the velcro you can use to attach the engine firewall back pad.

914 Front trunk cable - Cable only

914 Front trunk cable - Cable only

This is the front trunk cable only for the 914. It is a direct replacement for the OEM. These usually fail at the attachmnet point in the release mechanism. Making the cable just a little too short. Both the engine deck lid cable and the front...

914 headlight actuator arm. 914.750.185.11 set of 2

914 headlight actuator arm. 914.750.185.11 set of 2

This is a set of headlight push rods or actuator arms that were the later style, replacing the metal ones. They are lighter that the old arms and actually have the bushing built into them. I was making the bushings for the metal arms and noticed...

914 Headlight pivot bushings set of 4 enough for one car

914 Headlight pivot bushings set of 4 enough for one car

Headlight pivot bushings. These replace the old nylon ones that desintegrate. They go in the tube and interact with the metal brackets that mount to the body. We are doing up the arm bushings next and will have them in a few weeks.

914 heater lever knob - Red

914 heater lever knob - Red

This is a direct

replacement for your faded or beat up heater lever. Simply screws on after the old one screws off.

914 Jack strap -Rubber only set of 2

914 Jack strap -Rubber only set of 2

These are the new formulation more flexable jack strap rubber. While the straps do not display the pat number on them are are equivalent to the OEM parts. This listing is for a set of 2 pieces as shown.

914 Late window delrin rollers

914 Late window delrin rollers

These are the rollers that come on the scissor assemblies on the late window set up. This is for 2 sets of 2 rollers (you need 2 per side). These were never available as a separate part from the assembly. Now you can buy just the parts you need. $19 !!!

914 Pedal board gas pedal stop base

914 Pedal board gas pedal stop base

This is a reproduction pedal board stop holder. Ff yours is too rusty or unservicable you can easily replace it.

914 Pedal Stop Adjuster

914 Pedal Stop Adjuster

This is the pedal stop adjuster for the gas pedal. Made from machined delrin, these stops are a huge improvement over the cast nylon used for the OEM part.

914 Rear deck lid relaease cable

914 Rear deck lid relaease cable

This is a direct replacement for the rear deck cable cable, it has a threadded termination that will screw right into the handle base to allow you to pull. This typically fails at the latch portion where the stress is at the termination there. I...

914 Rear strut tower caps set of 2

914 Rear strut tower caps set of 2

 This listing is for a set of 2 (enough for one car) rear strut tower caps. If yours are missing or crusty like most now you can replace them with brand new parts. I don't know of anywhere where you can buy these but here.

914 rear sway bar bushing set of 2 90133379304

914 rear sway bar bushing set of 2 90133379304

These are the new thermally enhanced rear sway bar bushings, I include both, think about it, do you really only want to replace one? These have been NLA for quite some time and I have been hand casting these. The quality is vastly improved. The...

914 Rear trunk Lid Guide Bushing

914 Rear trunk Lid Guide Bushing

This part is the one that holds the spring in place on the rear trunk locking guide pin. This was only available as an assembly previously. Only $9.99

914 Rear Trunk Spring Roller Set

914 Rear Trunk Spring Roller Set

These are the rear trunk rollers that crack and break from the pressure of the spring to hold up the rear trunk lid. Replace yours before they break, much easier. These are now in white like OEM

914 Rocker panel rivets set of 12 + 2 extra

914 Rocker panel rivets set of 12 + 2 extra

This is a set of rocker panel rivets that you can use to attach the factory rocker panels for your 914. You need 6 per side, and we included 2 extra just in case.

They are black finished aluminum so they will not rust.

914 Rubber roof holders - set of 2 left and right

914 Rubber roof holders - set of 2 left and right

These are the rubber roof holders that hold down the targa roof in the rear of the trunk. They are solid rubber and have stainless steel internal bushings. They also come with all new stainless hardware

914 Seat Adjuster Handle

914 Seat Adjuster Handle

This is a replacement handle that is guaranteed not to break before you seat track does. It's powdercoated in black and attaches with machine screws $14.99

914 Threshold trim "Chrome"

914 Threshold trim "Chrome"

This is a set of all 4 pieces, the carpet strips that hold the inner door seals, as well as the door thresholds. Just like OEM.

These are NEW

914 Upper Rear Trunk Roof Holder

914 Upper Rear Trunk Roof Holder

This is the plastic roof holder that goes in the front of the rear trunk. The roof sits on it at the top, this is the other part you will need if you are replacing all the rear trunk hardware. $6.40 each (sold individually)

914 Vibration dampening bushing A434-16 91433351301

914 Vibration dampening bushing A434-16 91433351301

This is a reproduction of the NLA vibration dampening bushing for the rear strut tower. Compare to 914 333 513 01. I am making another style also (click on detail for more info) $40 a set

914 Vibration dampening bushing A434-17 91433351301

914 Vibration dampening bushing A434-17 91433351301

This is a reproduction of the NLA vibration dampening bushing for the rear strut tower. Compare to 914 333 514 01. I am making another style also (click on detail for more info) $40 a set

914 Visor clip set left right and center

914 Visor clip set left right and center

These are a complete set of visor clips with the left right and center. They have stainless pins so they will not rust. The left and right are still available, but are a superseded part that has a smooth texture.

914 wheel center caps

914 wheel center caps

This is a set of 4 aluminum center caps that have a tight friction fit like the OEM, on the tops are solid aluminum so you can pop them in and out with a rubber mallet without deforming them. $85 a set of 4

914 Window Crank Arm - Black

914 Window Crank Arm - Black

This is a window crank for your 914 like OEM. Black plastic cover over metal.

914 Window Roller Attachment Stainless Screws Set of 2

914 Window Roller Attachment Stainless Screws Set of 2

This is the correct length screw for the window roller handle attachment. In stainless, set of 2.

914 Windshield Chrome Retainer Clips

914 Windshield Chrome Retainer Clips

These are the plastic clips that retain the aluminum trim around the windscreen. 19 are required to replace all. These are typically replaced when the windshield is replaced.

914-6 hand throttle replica - for carbed cars - or AX

914-6 hand throttle replica - for carbed cars - or AX

This is a replica of the 916 hand throttle used to help set the "choke" when the car is warming up. or if you want to maintain a higher base RPM for A/X.

914.424.075.02.NC 914 heater cable for 70-74 (NOT 914/6)

914.424.075.02.NC 914 heater cable for 70-74 (NOT 914/6)

This is a reproduction of a factory 914 heater cable that was made from an OEM part. Like the OEM we added an anti abrasion coating to keep metal from metal contact in the heater tubes. We offer you the option to purchase without in the...

914.424.075.03 914 heater cable for 75-76

914.424.075.03 914 heater cable for 75-76

This is a reproduction of a factory 914 heater cable that was made from an OEM part. Like the OEM we added an anti abrasion coating to keep metal from metal contact in the heater tubes. We offer you the option to purchase without in the...

914.424.224.03 late side shifter Firewall bushing

914.424.224.03 late side shifter Firewall bushing

This is the firewall bushing that will take some of the slop out of your shifting. Normally these are difficult to install, but we have made some changes that will allow for easy installation. We I decided to make these just like the small...

914.424.591.00 Parking brake sealing bellows - Set of 2

914.424.591.00 Parking brake sealing bellows - Set of 2

This i sthe barking barake bellows that the OEM one disolves in brake fluid. Now you can replace this hard to find part, inexpensively. This is a set of 2, because if you are missing one, you probably need or will need another soon.

914.628.012.55 mount for wiper assembly

914.628.012.55 mount for wiper assembly

This is the piece that is often damaged during removal as it's not easly seen. That is is it's still intact. 40 years of vibration has taken it's toll on most of these. Now you can replace yours. It is often purchased with the airbox rebuild kit...

914.722.021.10 Jack strap with hardward (stainless) set of 2

914.722.021.10 Jack strap with hardward (stainless) set of 2

Finally a high quality rubber part with hardware made to look like OEM, except it's stainless and will not rust like OEM!

914/6 Stainless fuel rail

914/6 Stainless fuel rail

These are made at the request of a 914/6 owner that wanted the correct rail reproduced in stainless. they have been flow and pressure tested to meet (actually exceed) flow rates and pressures compared to the OEM. We may be out from time to time...

91453195910 Door aluminum tracks - hold rubber & fuzzey (2)

91453195910 Door aluminum tracks - hold rubber & fuzzey (2)

These are the aluminum door tracks that hold the scraper and fuzzy seal against the outer surface of the door glass.

914WORLD Badges

914WORLD Badges

Yes, the 914World offical badge is done and ready to ship.

944 LCD replacement kit

944 LCD replacement kit

This is our kit to replace your 944 clock LCD. The half moon or "black screen" are symptoms of an LCD failure. LCDs are sensitive to vibration and moisture. Eventually over time they will all fail. Now you can replace the screen as 95% of the...

Airbox rebuild kit with late (grill type) top seal

Airbox rebuild kit with late (grill type) top seal

This is the seals you will need to rebuild the airbox flappers, and seal the bower unit to the upper section. It also includes the molder top seal that holds the grill in place. Others use a seal that is cut and glued in the corners for a fit...

Barrel nut assembly (1)

Barrel nut assembly (1)

This is the barrel nut that is used for throttle cable and the heater flapper valves.

It is the nut and "barrel" that is used to bind the associated cable end.

Battery block positive terminal - optional hardware and stud

Battery block positive terminal - optional hardware and stud

This is the NLA battery block that is used on the positive terminal. It's NLA but you can get one here inexpensively. The current configuration allows for the option to add the stud and hardware if you do not have them.They do not come with unless you use the option to add them.

Caps for Ski Rack mounting holes (set of 6)

Caps for Ski Rack mounting holes (set of 6)

Caps to cover the mounting holes for factory ski racks

Cary's suspension gussets for control arm area.

Cary's suspension gussets for control arm area.

These are the blanks for gussets you would use to reinforce the suspension control arms. Made to Cary's specification these are what he uses to reinforce this area. Made under license form Middlemotor LLC. This is a set for one side only. If you intend to do both you will need to buy 2 sets.

Climate control knobs set of 3 - 1 red 2 black 901.571.917.00

Climate control knobs set of 3 - 1 red 2 black 901.571.917.00

Now you can buy these never available alone parts to spruce up your climate control quickly and inexpensively. This is a set of 3. One Red Two Black They were used on 911, 912, 914, and 930 models from 1965 to 1985.

Clock bulb for the back light on the LCD dash clock

Clock bulb for the back light on the LCD dash clock

This is the bulb only you need to replace the back light on your LCD 944/51 clocks $4.99

Clutch cable end (trunion), bellows, 2 nuts, pulley and bushing

Clutch cable end (trunion), bellows, 2 nuts, pulley and bushing

This is a package that includes the Clutch cable end that attaches to the throwout bearing arm, the bellows that keeps crud out of the cable tube, the pulley, pulley bushing and 2 correct nuts to set tension. Others will sell you a nylock nut. It...

Clutch cable trunion 911.423.205.03

Clutch cable trunion 911.423.205.03

This is for the glod plated clevis that the clutch cable slides through brand new now $6 all day long.

Door Cam Actuator

Door Cam Actuator

These are the plastic cams that you need to open the door when the handle is pulled. They transfer the load to the mechanisim in the door from the handle. Sold Individually. 

Early bumper spacer "dog bones" set of all 4

Early bumper spacer "dog bones" set of all 4

Photos and Descriptions from 914rubber.com These are new spacers for the early bumpers. The isolate the body from the bumper and help keep the proper gap.
Now you can get a set of 4.

Early Trans Rubber Bellows and Band for Plastic Housing

Early Trans Rubber Bellows and Band for Plastic Housing

 This is a set of both the band at the housing to firewall and the bellows on the firewall housing.

Parts 914.424.502.00 and 914.424.297.00

Engine deck lid base for pull 914.512.177.10

Engine deck lid base for pull 914.512.177.10

This is the machined base for the engine deck lid pull. It holds the back pad to the fireall in this area also.

Engine Deck Lid Bumper Set 914.559.253.10

Engine Deck Lid Bumper Set 914.559.253.10

These are the long sought after engine deck lid bumpers that are NLA. You can get them here and inexpensively.

 

Engine screw kit Stainless w/washer allen head

Engine screw kit Stainless w/washer allen head

This is a set of 50 allen head screws with washers that replace the original "cheesehead" screws. They are stainless with stainless washers. $20

Fender liners set of 4 with mount clips

Fender liners set of 4 with mount clips

This is a set of fender liners that will help keep the crud from building up in the crevices that are known to harbor rust and keey more from being applied.

If you have a daily driver these are a must.

Front Trunk Drain Tube (914) Light Bucket Drain 911 Application

Front Trunk Drain Tube (914) Light Bucket Drain 911 Application

This is a drain tube that is located on the bottom of the front trunk in the 914 and is also used in the 911 light buckets. I designed the tube to be slightly more square at the base to help create a slightly more rigid base. This helps to keep...

Front trunk guide tube and pull cable

Front trunk guide tube and pull cable

This is a set of the front trunk release tube and the pull cable that goes in it. If your tube is cracked it allows the wire to flex making it dificult to open the front trunk. They were NLA from factory for some time so I decided to make them....

Front trunk guide tube only (NO CABLEINCLUDED)

Front trunk guide tube only (NO CABLEINCLUDED)

This is for the front trunk guide tube only. The cable is shon in the picture BUT IS NOT INCLUDED.

I listed this for people that just need the tube.

Gas pedal package with clutch and brake rubber covers

Gas pedal package with clutch and brake rubber covers

This package is fro a new gas pedal along with the clutch and brake pad rubber covers.  You get all 3 pcs. 

Grille Badge -ADAC Club

Grille Badge -ADAC Club

ADAC CAR CLUB GERMAN CAR GRILLE BADGE
(Allgemeiner Deutscher Automobil-Club e.V.)

Grille badge comes with basic mounting hardware. Silver base.

Grille Badge- German 10 city version

Grille Badge- German 10 city version

This is a grille badge representing the 10 city tour through Germany. Pretty cool item. Comes with basic mounting hardware fot attachment to grille.

Headlight adjuster backing set of 4 (enough for one car)

Headlight adjuster backing set of 4 (enough for one car)

These are the NLA headlight adjuster backs, this is enough to replace all on one car.

Late Airbox Grill

Late Airbox Grill

Reproduction airbox grill for use with the late syle top seal. 

Late Side Shift Bushing Kit

Late Side Shift Bushing Kit

Get everything you need to eliminate sloppy shifting in one kit, with the option to add the shift housing cover for only $12 more. Kit consists of: 911.424.139.00 911.424.223.03 (x2), 911.424.224.02, 911.424.224.03, and 914 424 239 02.

New Fog light Grills set left and right - like OEM +install kit

New Fog light Grills set left and right - like OEM +install kit

These are the 3rd generation of our fog light grills and we jhave finally got them nailed. Comparable to OEM in material, fit and finish. Utilizing a more durable plastic these will withstand 2x the inpact of the previous generation. They also...

(1)

PCG 424.501.01 Late side shifter cover

PCG 424.501.01 Late side shifter cover

This is the cover that keep the crud from gettining into the shift mechanism atthe rear of the linkage. It mounts onto a plate atthe transmission. It is a nice part to finish off your underside ans it's nice and glossy. It is also flexable...

PCG42407501 914 heater cable for 914/6

PCG42407501 914 heater cable for 914/6

This is a reproduction of a factory 914 heater cable that was made from an OEM part. Like the OEM we added an anti abrasion coating to keep metal from metal contact in the heater tubes. We offer you the option to purchase without in the...

Plastic sway bar bushing 90134378200 set of 2

Plastic sway bar bushing 90134378200 set of 2

The plastic sway bar bushings are a must to replace if you are working on your rear sway bar.

At $5 a set they will not break the bank.

Drop these in boiling water for a few minutes to soften them up.

Plywood floor board - drivers side only

Plywood floor board - drivers side only

This is the plywood blank cut to the OEM dimmensions. PLEASE NOTE the board in the picture shoows the stop base attached, it is not included with the board, and will need to be ordered if you want it.

Porsche 914 911 Hockey puck horn base only

Porsche 914 911 Hockey puck horn base only

Reproduction of the hockey puck horn base. Please note hareware to mount the spring assembly is #8x1/2" not metric. will require some modification )increase of hole size on mounting.

 

Porsche 914 clutch cable 914.423.401.05

Porsche 914 clutch cable 914.423.401.05

Clutch cable for 914 -4

Picture shows all of the other parts you may want, but this is for a clutch cable only.

Porsche 914 CV joint gasket - 1

Porsche 914 CV joint gasket - 1

This is the gasket you need to replace the OEM one when you clean up the CV jooint or put a new one in.

4 required per car

Porsche 914 Jack hole plug

Porsche 914 Jack hole plug

Jack hole plug - you need 2 of these to do one car. 91455926710 is the part number. These are OEM. There are 2 in the picture, You will need to order 2 to get 2.

Porsche 914 Throttle position sensor board 72-73 only

Porsche 914 Throttle position sensor board 72-73 only

This is a new circut board and a pop rivet to install it. It comes with an instruction sheet. You may notice that your 914 cuts out or hesitates at certian throttle settings (mostly it stumbles when you start to accelerate. One cause can be that...

Porsche Windshield Washer Squirter

Porsche Windshield Washer Squirter

Replacement nozzle for windshield sprayers. Available in black (reproduction) or chrome (OEM). Sold individually.

pull for deck lid machined delrin

pull for deck lid machined delrin

This is the engine deck lid pull only. If your base is good and you only need the knob, this is what you need.

Radio plates for modern radio DIN style / Delete plate

Radio plates for modern radio DIN style / Delete plate

This is a radio plate for the 914 covered with the early or late style dash face vinyl. It comes with self adheasive backing for easy installation.

Note there is an option for radio delete

Recaro Seat adjuster knob 911.521.163.00

Recaro Seat adjuster knob 911.521.163.00

Reproduction Seat adjuster knob for recaro seats. Has metal clip internally to engage the seat rod. Save some cash on these!

Rubber bumper to keep trunk from hitting deck lid

Rubber bumper to keep trunk from hitting deck lid

This is the NLA rubber "bumper" that keeps the rear trunk lid from hitting the engine deck lid. You will need the metal angle bracket that holds this in place, as it is not included.

Rubber hood bumper 999.703.036.50 (4) required per car

Rubber hood bumper 999.703.036.50 (4) required per car

These are the rubber bumpers that adjust up and down to create a positive stop for your hood.

(1)

Safety wire tool

Safety wire tool

This tool helps to tie the wire neatly, and with much greater efficiency than using a plyers

Seat adjuster bushing 914 521 203 10

Seat adjuster bushing 914 521 203 10

This is the long discontinued seat adjuster bushing that allows the armature to rotate at the spring. This is for one bushing. Note that I do sell a complete kit with 2 bushings, the 2 other main guide bushings, new roll pins. Best of all it...

Seat adjuster outer guide bushing 914 521 205 10

Seat adjuster outer guide bushing 914 521 205 10

This is the outer guide bushing for the seat adjuster rod. It helps to transfer torque on the bar to help release the tilt. Note that I do sell a complete kit with 2 bushingsm the smaller guide bushings, new roll pins. Best of all it comes with a...

Seat adjuster rebuild kit for one car and special tool included

Seat adjuster rebuild kit for one car and special tool included

This kit is enough to do 2 seats or one car. It includes 2 of each bushing 2 drive pins and the special tool you will want.

Set of 50 Cheese Head screws and washers Zinc plated

Set of 50 Cheese Head screws and washers Zinc plated

This is a set of cheesehead screws with washers for those that want the stock style. They are zinc and prone to stripping. If you want to avoid those issues we highly recomment the sainless allen verstion of this fastner. Available for not much more.

Side shift 914 and 911 knuckle bushings set 911 424 223 03

Side shift 914 and 911 knuckle bushings set 911 424 223 03

These are the bushings for the late coupler on the side shift linkage. These are toleranced correctly so they fit snug and are easier to install. Looks like these are part # 911.424.223.03. I had ordered new from factory and they were sloppy....

Special tool for drive pins - seat adjuster applicatiom SPT900

Special tool for drive pins - seat adjuster applicatiom SPT900

This is a special tool to install drive pins. It allows you to center the pin and use a hammer to wedge the pin in.

Speedo Drive Bushing - Double Seal (NO LEAKS) 901.318.243.12

Speedo Drive Bushing - Double Seal (NO LEAKS) 901.318.243.12

Improved speedometer drive bushing for Porsche 914 with an addition seal to stop leaks.

Part number 901.318.243

Stainless wire for CV bolts 36" min

Stainless wire for CV bolts 36" min

This is a 36" coil of stainless steel safety wire. To be used with drilled CV bolts.

Steering linkage "puck" 901.347.201.02

Steering linkage "puck" 901.347.201.02

This part is a vibration dampener. It actually flexes to help provide a smoother response to the steering wheel when going over a bumpy road. Others have made this part out of Delrin or aluminum, which is fine if you want t transfer all the...

Tensioning rod for seat tilt adjuster 900.095.010.01

Tensioning rod for seat tilt adjuster 900.095.010.01

This is the roll pin necessary to keep tension on the spring for the tilt adjuster. It has other applications also. Note that I do sell a complete kit with 2 bushings, the 2 other main guide bushings, new roll pins. Best of all it comes with a...

Threashold Trim Black

Threashold Trim Black

This is a full set for one car; it includes 2 threshold plates and 2 carpet strips. Comparable to the factory plastic ones, except they will not bend at the carpet trim screws. These are hardcoat anodized black. 

Threashold Trim Black carpet strips only set of 2

Threashold Trim Black carpet strips only set of 2

These are just the 2 strips that hold down the carpet at the edges. Black plastic was what was used for the late cars. The plastic will not allow you to tighten down the screws without bending the heck out of the plastic. Now you can replace them...

Throttle Position Sensor Board Early 1.7 ONLY: 1970-1971

Throttle Position Sensor Board Early 1.7 ONLY: 1970-1971

This is the throttle position sensor board for the early 1.7 TPS. It will only work on the early (70-71) TPS, as they are quite diferent from the late.

Windage Tray Oil Baffle Seal - Set of 4

Windage Tray Oil Baffle Seal - Set of 4

These are all new silicone windage tray seals. Don't forget to replace these when you rebuild your motor.

Windshield washer offset isolator standoff

Windshield washer offset isolator standoff

If you've done a bare metal restoration, you may well be familiar with this part. probably 80% of all the cars out there have the factory original offset isolators. Most have deteriorated and cracked if not sheared. Mine actually split in 2....

Wiper grommet male set of 2 901.628.924.00

Wiper grommet male set of 2 901.628.924.00

This is a listing for the male grommets in the wiper assembly. It is for a set of 2. These have application for 911, 924, 928, and 944's.

Wirring hold down cover. Correct gloss fits well per 1'

Wirring hold down cover. Correct gloss fits well per 1'

We faithfully recreated the wiring harness hold down material. Others will sell you shrink tube and yes you can make it work, but it's not right. Ours fits and is actually a soft rubber with correct gloss level and it actually grips and holds well. It takes about 9' for every hold down on car.