Transmission

 

Porsche 914 clutch cable 914.423.401.05

Porsche 914 clutch cable 914.423.401.05

Clutch cable for 914 -4

Picture shows all of the other parts you may want, but this is for a clutch cable only.

Clutch cable trunion 911.423.205.03

Clutch cable trunion 911.423.205.03

This is for the glod plated clevis that the clutch cable slides through brand new now $6 all day long.

Porsche 914 Clutch Cable Bellows 914.423.922.02

Porsche 914 Clutch Cable Bellows 914.423.922.02

Clucth cable bellows replace your old mangled or missing bellows for a fraction of the cost others charge. High quality.

914 Clutch pulley assembly

914 Clutch pulley assembly

This is a custom machined Delrin Pulley with a new insert bushing.

Clutch cable end (trunion), bellows, 2 nuts, pulley and bushing

Clutch cable end (trunion), bellows, 2 nuts, pulley and bushing

This is a package that includes the Clutch cable end that attaches to the throwout bearing arm, the bellows that keeps crud out of the cable tube, the pulley, pulley bushing and 2 correct nuts to set tension. Others will sell you a nylock nut. It...

Clutch Cable M7 Hexagon Nut - Stainless Steel

Clutch Cable M7 Hexagon Nut - Stainless Steel

This is the correct nut for your clutch cable. I recomend using 2 tightened against each other to lock them in place. Many have used Nylock nuts to replace the onle ones. I had a bad experiece where on a hot day mine got warm enough when I was...

911.424.139.00 Ball cup for shifter at transmission

911.424.139.00 Ball cup for shifter at transmission

This is the ball cup that fits into the lever on the transmission that connects to the rod. Don't forget to check out the other related items as you may need them.

Brake light / Trans reverse light switch cover 914.613.491.00

Brake light / Trans reverse light switch cover 914.613.491.00

This is the same boot for both application. Fits all years. These are currently availabe at over $20 each. Mine have the correct retaining grove at the base to make a good seal. Save yourself a bunch of cash and get a well made part. These are in...

Late side shifter bushing for transmission mount 914.424.224.02

Late side shifter bushing for transmission mount 914.424.224.02

This is the bushing that installs at the mount on the transmission to guide the lever for a more solid shift.

914 Transmission tail cone gasket

914 Transmission tail cone gasket

This is the gasket you need to remove the tail cone and reinstall. If you don't want to pay for an entire kit you can get just the one you need.

Early Trans Rubber Bellows and Band for Plastic Housing

Early Trans Rubber Bellows and Band for Plastic Housing

 This is a set of both the band at the housing to firewall and the bellows on the firewall housing.

Parts 914.424.502.00 and 914.424.297.00

Speedo Drive Bushing - Double Seal (NO LEAKS) 901.318.243.12

Speedo Drive Bushing - Double Seal (NO LEAKS) 901.318.243.12

Improved speedometer drive bushing for Porsche 914 with an addition seal to stop leaks.

Part number 901.318.243

Side shift 914 and 911 knuckle bushings set 911 424 223 03

Side shift 914 and 911 knuckle bushings set 911 424 223 03

These are the bushings for the late coupler on the side shift linkage. These are toleranced correctly so they fit snug and are easier to install. Looks like these are part # 911.424.223.03. I had ordered new from factory and they were sloppy....

914.424.224.03 late side shifter Firewall bushing

914.424.224.03 late side shifter Firewall bushing

This is the firewall bushing that will take some of the slop out of your shifting. Normally these are difficult to install, but we have made some changes that will allow for easy installation. We I decided to make these just like the small...

Early side shift firewall to housing gasket

Early side shift firewall to housing gasket

This is the tail shift gasket that holds the plastic housing to the firewall. This is only the "band" at the firewall.

 914.424.502.00

914 late side shifter bellows

914 late side shifter bellows

Yes 2 are shown, but you only need one. This is the bellows that goes at the rear of the shift linkage and keeps crud from getting into the shifter housing (the black plastic cup).

They were NLA, but you can get them here.

Span Band for late side shifter cover 914.424.503.01 Repro

Span Band for late side shifter cover 914.424.503.01 Repro

This is the NLA "Span Band" that is used to tension the cover at the transmission.

901.741.291.00 Tail shift sealing sleeve #50 on the PET

901.741.291.00 Tail shift sealing sleeve #50 on the PET

This is the rear sealling bellows for the early side shift transmission. PET catalog shows part as 901.741.291.00. Interestingly enough others reference this as Speedometer Cable Boot Fits 911, 1965-1971. This was reproduced off a stock 914 part...

Early tail shift bellows 914.424.297.00 70-72

Early tail shift bellows 914.424.297.00 70-72

This is the bellows that fits perfectly on the plastic housing of your tail shift cover at the firewall.

Shown with the band that is available, but not included

914 Tail Light Gasket Set

914 Tail Light Gasket Set

These are the gaskets that go between the body and the tail light assembly. This is a set of 2. Only $24

914 rear tail light lens seal

914 rear tail light lens seal

This is a set of soft silicone cords that are used to seal the lens to the housing. These ARE NOT the seal between the body and housing.