Misc Hardware - 914Rubber.com

: 914 door lock bushing (2); This is an aluminum bushing that replaces the OEM plastic bushing. It will bear better than the plastic and when installed with marine grease will provide a water resistant seal. If your planning to work on your lock this is a must.

914 Clutch pulley assembly

This is a custom machined Delrin Pulley with a new stainless insert bushing. The OEM bushings are not available any longer and top take full advantage of the improvement of the pulley you really need the clearance on the bushing to be minimal. That is why these are sold as a set. $19.99

914 Door stay arm

This is a single arm that you can use to replace the old one if your roller has worn all the way down and flattened the ridges that make the door stay open. This is one arm. You will need 2 if you are doing both doors. $12 each

914 Door stay roller replacements Rollers only

This is a set of both rollers for 2 doors. Enough to do 1 car. These are notorious for wearing in the nylon side and flattening the aluminum strap. $19.99

914 Early window rollers

These replace the rollers for the early style windows. There are 4 on each window. This is a set of all 8 to do both windows. They are different than factory (see descriotion). If you can see the metal bonded to the front edge of the window these are the rollers you will need. $24 for ALL

914 heater lever knob - Red

This is a direct replacement for your faded or beat up heater lever. Simply screws on after the old one screws off.

914 Late window delrin rollers

These are the rollers that come on the scissor assemblies on the late window set up. This is for 2 sets of 2 rollers (you need 2 per side). These were never available as a seporate part from the assembly. Now you can buy just the parts you need. $14 !!!

914 rear trunk spring rollers

These are the rear trunk rollers that crack and break from the pressure of the spring to hold up the rear trunk lid. Replace yours before they break, much easier.

914 Rubber foor holders - set of 2 left and right

These are the rubber roof holders that hold down the targa roof in the rear of the trunk. They are solid rubber and have stainless steel internal bushings. They also come with all new stainless hardware

914 Seat adjuster handle

This is a replacement handle that is guaranteed not to break before you seat track does. It's powdercoated in black and attaches with machine screws $19.99

914 Visor clip set left right and center

These are a complete set of visor clips with the left right and center. They have stainless pins so they will not rust. The left and right are still available, but are a superceeded part that has a smooth texture. They list OEM for $54 each. Has 911 application